Install the hard drive controller card onto your motherboard. Plug the hard drive into the controller card. Turn on your computer and open the operating system install wizard. Before you select the hard drive that you want to install the operating system onto, select the option to install third-party drivers.

Ashwani Tiwari | Modified: November 9th, 2020 | Windows Error

“I have a desktop that I added PCI based raid controller card as well. The BIOS displays the card and I was able to configure Raid 1 without any issue. But when I try to install Windows I got an error message “Windows cannot be installed to disk. This system hardware may not support booting to a disk. Ensure the disk controller is enabled in the computer’s BIOS Menu.”

Via hard disk controller driver download

So, could you please help me to fix the issue of how to enable the disk controller in the computer bios menu? Your help would be greatly appreciated.”

Connect the Hard Drive to the Firewire port using a Firewire cable. Once, your connected, the power on the device. Go back into the Device Manager. Click on the arrow next to Disk Drives. This will show you all of the disk drives connection to the computer, including the external Firewire Hard Drive as shown below. NOTE: If the Hard Drive doesn't show up under Disk Drives, then check the following things.
See full list on viatech.com.

Are you still facing the same issue? Not able to understand what to do and how to enable the disk controller in the BIOS menu? Do not worry, you are landed on the right page. In this blog, we will discuss different ways to enable the disk’s controller in BIOS menu.

Expert Suggestion:
In case of data loss, try out this utility:

Manual Way to Enable Disk Controller in BIOS

There are multiple ways to enable AHCI mode for SATA on PC where Windows is already installed, and Windows that normally run after this operation. Please have a look on steps to solve your query on how to enable disk controller in bios menu windows 10:

First of all, run the Registry Editor
For this, press Windows + R and type regedit in the command line box
Go to this section HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services iaStorV
Double-click on Start icon and set its value to zero (0)
In the upcoming section, HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services iaStorAV StartOverride set zero value for element 0
In this section, HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services storahci set some values to zero for Start element.
In the next subsection, HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services storahci StartOverride set zero value for element 0.
In this case, there is nothing to be seen, but you can see, if AHCI may not be enabled yet.
Close the Registry Editor
Restart the system and go to BIOS or UEFI. For the first time after a restart, it is always better to boot Windows in safe mode
In BIOS or UEFI, find SATA settings to choose the particular mode for memory devices. Switch all of them to AHCI, save settings and restart the PC
After restarting, Windows can start the installation of SATA drivers, and when it gets over, it will ask for another restart. To do so, users will enable the AHCI mode in Windows. (If the above method does not work properly, here is another solution. To initiate with, if users have problems with booting Windows in AHCI mode, return to IDE and restart the desktop, After doing this:)

Start the Command promptas an Administrator
Type “bcdedit /set {current} safeboot minimal” in the command prompt and press Enter key
After getting a message that the operation successfully completed, restart the computer system
Before booting the system, enable the disk controller in BIOS or UEFI using the above method and save the settings
The PC will only boot up in safe mode and install all required drivers.
Again, launch Command prompt as Administrator and type in bcdedit /deletevalue {current} safeboot
Once the command is executed, restart the PC again. This time, Windows needs to boot with AHCI enabled and without any restrictions.

Well, these instructions can theoretically result in unintended consequences like the inability to start the operating system. Moreover, this method requires technical skills and knowledge to accomplish the task. Here you have got the solution for your query How do I enable disk’s controller in the BIOS menu?

Data Loss Solution!!

There might be an instance, wherein the drive gets corrupt or format while enabling the disk controller in BIOS. Therefore, to resolve all such issues, one can use Computer Data Recovery Software. It is a simple and reliable solution, which helps to recover all deleted files from the HDD. It is not the solution for your main concern on how to enable disk controller in the computer bios menu Windows 10, 8, 7 and brands Asus, Acer, Sony Vaio, Dell, Samsung etc.

Time to Conclude

At certain times, some users fail to enable disk controller in BIOS. This situation occurs due to several reasons. Therefore, in this blog, we have discussed a manual procedure to enable the disk’s controller in the BIOS menu. Else, users can opt for a reliable third-party tool, listed above. Mainly focused on steps to enable disk controller in bios menu Sony Vaio, Asus, Acer, Dell, Samsung in Windows 10, 8, 7 etc.

Stuck with external hard disk error on Windows 10? Are you unable to access the disk drive and its stored data? You can afford to lose all the files and data stored on the external hard drive, right?

Don’t worry! By following a bunch of workarounds, you can quickly fix this error on your device through simple troubleshooting steps.

In this post, we have covered a few solutions that will allow you to fix the I/O device error on Windows 10 PC. But before we proceed, let’s understand the possible causes of why you may encounter this issue on your device.

Most Common Causes Why I/O Device Error Occurs:

Missing/outdated drivers.
Physical damage on the hard disk.
Fault or corrupt hard drive.
Compatibility issues.
Incorrect Drive transfer mode.

What is I/O Device Error?

The external hard disk error is also referred to as I/O (Input/Output) device error as your system is unable to read the disk contents due to the occurrence of this issue. This error can occur on almost any kind of external hard drive be it portable disk, USB flash drive, or SD card. When you encounter the external hard disk error, you won’t be able to access the drive’s data, and the system will process none of your requests.

Also Read: How to Fix Hard Disk Errors on Windows 10.

How to Fix External Hard Disk Error?

Action montana e 300g driver for sale. Here are a few possible set of solutions to resolve external hard drive error on Windows 10 machine.

Cd-rom Controller

Solution #1: Update Device Drivers

One of the most common reasons why you may experience the I/O device error can be due to missing or outdated device drivers. By updating or reinstalling the drivers, you can efficiently resolve this issue. Follow these steps to update drivers on Windows 10:

Right-click on the taskbar and select “Device Manager”.

In the Device Manager window, look for all outdated drivers indicated with a yellow-colored “i” icon.

Right-click on the driver’s name and select “Update Driver” option from the context menu.

Follow the on-screen instructions to update all outdated device drivers on your system.

Sounds like too much hard work? Rather than manually updating all the drivers, you can install the Smart Driver C

VIA Hard Disk Controller Driver